4.3 inch TFT LCD digital TV with Nature Receiver

Features

Due to the nature of receiving digital TV signals,location and antenna position are very important. You will generally receive optimal reception in areas with little or no obstructions. Wood and glass structures tend to provide for better reception than steel or metal. Also,a stable environment will provide the most consistent signal, therefore ,operation of a digital TV while in a moving car will generally not produce an acceptable picture.

Watch The World Cup HDTV 2010 on the bed, working table, office etc. anywhere.You can enjoy sport programs when you want to watch it. It is so exciting!

Watch Cooking TV Program in the kitchen when you are preparing lunch or dinner for your family. Watch HDTV Program anytime and anywhere when you want to take a break.

Watch High Quality TV program when you stay in the office for OT. It refresh your mind!

It is an ATSC TV Box as well. It can cover full range of ATSC frequency.

The micro-enhanced LCD monitor offers viewers the ultimate viewing experience by delivering crystal clear video and image playback. This mobile video unit features a built-in digital ATSC tuner (antenna included) making it possible to access digital, over-the-air programming as well as analog TV programming (with HDTV support) from virtually any location.

Rf Emissions Information
This equipment has been tested and found to comply with the limits for Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the – following measures: – Reorient or relocate the receiving antennal.
– Increase the separation berween the equipment.
– Connect the equipment to an outlet on a circuit different from the device.
Consult your local store or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you stop using your device.
This device complies with Part 15 of the Fcc Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference reeived, including interference that may cause undesired operation.

Technical Specifications
Signal system: ATSC
Panel size: 4.3 inch TFT LCD
Panel resolution: 320(RGB) x 240
Panel pixel pitch: 0.219 x 0.219mm
RF input resistance: 75 OHM
RF receiving range: 54MHz-863MHz
Power source: DC 12V/1.2A
Lithium battery capacity: 7.4V/2000mAh x 2
Working current consumption: 750mA
Battery charging current: 600mA
Working hours (Battery only): around 2 hours
Stand-by hours (Battery only): around 11 to 15 days
Battery charging hours: around 2 to 3 days
Operating temperature: 0-40℃
Weight: 0.7kgs
Dimensions (L x W x H): 130mm*37mm*80
For America, Mexico, Canada
Accessories
4.3″ LCD Digital TV
Cable Antenna
Remote control with battery
AV Cable
AC Adapter
Earphone
User’s manual